Raven XT
16 20070914
Using Direct Commands to the Internal
Hardware
Use only if the ALEOS method is unsuccessful.
Activating the Modem
1. Put modem into passthru mode to by-pass ALEOS. This will allow direct
communication with the wireless module for programming. Entering passthru
will take 10-15 seconds and will return an ‘OK’ when it is complete.
AT\APASSTHRU
2. Verify you are in Passthru mode.
AT!STATUS
3. Unlock the module.
AT~NAMLCK=MSL
4. Set the MDN and MSID.
AT~NAMVAL=0,MDN,MSID,0,65535
5. Verify the settings are what you intended to enter.
AT~NAMVAL?0
6. Reset the module.
AT!RESET
7. Press the reset button on the front of the modem. When the modem restarts,
it should register on the network.
Commentaires sur ces manuels