Sierra Wireless AirLink GX400 Guide de l'utilisateur télécharger pdf (Page 33)

Installing and Activating AirLink GX400

Rev 3.0 Nov.11 33

Mounting an AirLink GX400

The GX400 can be mounted almost anywhere using the device’s recessed

mounting ears. An optional mounting kit (with mounting adapter) is also available

when replacing a PinPoint X device.

Mounting

All GX400s are shipped with a Product Kit (P/N 1202162) that contains four #8

sheet metal/wood-type screws and four internal lock washers. Figure 3-9 is a

diagram (with dimensions) of the GX400’s base for mounting the device.

Figure 3-9: Diagram of the GX400 Base (Not to scale)

To mount the GX400:

1. Place the GX400 in the exact position where the unit is to be secured.

2. Using a pencil or applicable writing tool, outline the four mounting ear holes

on the mount surface.

3. Remove the GX400, and drill a small “starter” hole at the center of each

outlined hole.

4. Replace the GX400 to its mounting position, insert all four screws (with

washers attached) through the recessed mounting ears, and tighten the

screws until they are hand tight and secure.

95.2 mm

3.75”

55.75 mm

2.19”

40 mm

1.57”

32.6 mm

1.28”

22.5 mm

.88”

95.2 mm

3.75”

UNIT FRONT

4 X 4.5 mm D

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 49 50

Pas de commentaire

Sierra Wireless AirLink GX400 Guide de l'utilisateur Page 33