Sierra Wireless AirLink MP890 Guide de l'utilisateur télécharger pdf (Page 27)

Rev 1.0 Mar.10 19

3: Activating your MP on your cellular

provider network

• Configure your

account

Configure your account

1. Install the USB, Ethernet or serial cable

Note: Ensure that the MP

modem and your computer

are powered off while

installing cables.

To install the USB, Ethernet, or serial cable, thread the cable through

the vehicle and attach it to the USB, Ethernet, or serial connector on

the MP modem.

Note: Do not connect the cables to the computer until you have installed the

software.

The MP modem has a SIM card slot next to the lights on the indicator

panel. The slot is protected by a removable rubber cover, and houses

a SIM card sled. To insert a SIM card into the MP modem:

2. Open the rubber cover.

3. Use a pen or stylus to press the yellow eject button inside the

slot.

4. Pull the sled out of the slot.

5. Place the SIM card into the sled until it clicks into place. The SIM

card should fit in only one way, with the contact surfaces facing

up as shown.

Figure 3-1: Placing a SIM card into the sled.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 66 67

Pas de commentaire

Sierra Wireless AirLink MP890 Guide de l'utilisateur Page 27