Sierra Wireless DART 200 CDPD Modem Guide de l'utilisateur Page 54

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 206
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 53
DART 200 CDPD Modem User’s Guide 4 Broadcast and Multicast Operation
Sierra Wireless, Inc. 4-4
Some software stacks, used when the DART 200 operates in Serial Line
Internet Protocol (SLIP) mode, only receive broadcast messages
(including multicast) on a specific IP destination address, specifically the
point-to-point NEI. To provide for this limitation, the DART 200 permits
specifying whether or not the received destination IP Address (multicast
address) is replaced with the active point-to-point NEI before the
received packet is passed across the SLIP interface to the software stack.
This feature is implemented by using the AT*G command. AT*G1
(default) causes the received destination address to be replaced as
described above. AT*G0 passes the received packet across the SLIP
interface to the TCP stack unmodified, with the destination address being
that of the Multicast NEI.
Vue de la page 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 205 206

Commentaires sur ces manuels

Pas de commentaire